Take Your Hospital Operations to the Next Level

Engineered Electronics houses a vast inventory of emergency stations built with the most advanced technologies. Below is a detailed description of our products:

900-108 Push Button Emergency Stations

Untitled-4 (1)

The EEi model, 900-108 call station components, are electrically isolated from the single gang face for proper mounting into a one gang box. By pressing the red switch button inward, a call is placed. Cancellation of the call is always from the originating station by pulling the red switch button outward. The call assurance lamp is a red LED.

FEATURES:

  • Single gang construction
  • Push-button operation
  • Mounts with no sub-assemblies
  • Call and reset from the same location
  • Visual call indication
  • Electronic isolation
  • Splash proof
  • Minimum system wiring

900-110 Shower Station

900-110

The EEI 900-110 Shower Station is designed for use in moisture-prone areas, such as showers or where spray cleaning is required. Activation of the device is accomplished by gently pressing the switch or pulling the cord downward. Cancellation of the call is always from the originating station by pressing the switch back to the upward position. The call assurance lamp is a red LED and is activated when the switch is in the downward position.

FEATURES:

  • Call and reset from the same location
  • Physical and visual call indicator
  • Splash proof
  • Single gang construction
  • Mounts with no sub-assemblies
  • Minimum system wiring
  • 72in cod

900-112 Code Station

Code Station 900-112

The EEI Code Station components are electrically isolated from the single gang plate for proper mounting into a one gang box. By gently pressing the switch until it locks, a code call is placed on the system. Cancellation of the call is always from the originating station by gently pulling the switch button outward. The call assurance LED is Blue and will flash when a call is placed.

FEATURES:

  • Single gang construction
  • Mounts with no sub-assemblies
  • Call and reset from the same location
  • Physical and visual call indication
  • Electronic isolation
  • Minimum system wiring

900-119 Lavatory/Emergency Station

Lavatory/emergency Station 900-119

The EEI 900-119 Lavatory-Emergency Station components are electrically isolated from the single gang plate for proper mounting into a one gang box. By gently pressing the switch or pulling the cord downward, an emergency call is placed on the system using independent circuits or those of the patient station (if in the same room). Cancellation of the call is always from the originating station by pressing the switch in the upward position. The call assurance LED is red and is activated when the switch is in the downward position.

FEATURES:

  • Single gang construction
  • Mounts with no sub-assemblies
  • Call and reset from the same location
  • Physical and visual call indication
  • Electronic isolation
  • Minimum system wiring
  • 72in cord